"Settings" menu item (continued) - Expert
Manual mode - probes (continued)
Parameter
Selection parameter
4th mixed heating cycle return temp.
*)
S14.2
Probe value / stipulated value
Temperature
*)
S14.2
-60°C - 250°C
Heat generator return temperature (HP 1)
S15
Probe value / stipulated value
Temperature (HP 1)
S15
-60°C - 250°C
Heat generator
return temperature (HP 2
*)
)
Probe value / stipulated value
Temperature (HP 2
*)
)
-60°C - 250°C
Energy supplier (public utility)
external block
S16
On / Off / Auto
Heat pump fault
S20
On / Off / Auto
Compressor active
S21
On / Off / Auto
Defrosting (thawing) active
S22
On / Off / Auto
Medium flow rate solar
S23
Probe value / stipulated value
Medium flow rate
S23
0 l/min - 100 l/min"
Medium flow rate (indoor unit) (HP 1)
S24
Probe value / stipulated value
Medium flow rate (HP 1)
S24
0 l/min - 100 l/min"
Medium flow rate (indoor unit) (HP 2
*)
)
S24.2
Probe value / stipulated value
Medium flow rate (HP 2)
S24.2
0 l/min - 100 l/min"
Medium flow rate flow sensor
S27
Probe value / stipulated value
Medium flow rate flow sensor
S27
0 l/min - 100 l/min"
*)
This parameter may differ from your display depending on the type and model of the heat pump.
REMKO Smart-Control Touch
82
