Setting up the network
In the authentication parameter, now select the
appropriate parameter for your WLAN network.
Note that the REMKO Smart-Control Touch only
supports the WPA 2 encryption/security standard.
For this purpose you must know the name of your
WLAN network and the corresponding password.
Once you have selected "WPA2 personnel", you
must then enter the SSID (name of the WLAN net-
work).
Fig. 34: Select WLAN network
You have the following options for authentication:
n
WPA2 Personal
n
WPS Push Button
n
WPS Pin
n
SERVICE HOTSPOT
For authentication via the "WPS Push Button" the
internal house router must have a push button
function.
Now scroll down to select the SSID parameter. As
described in the following, enter and save the
name of your WLAN network and the corre-
sponding password.
To enter the SSID, select the parameter by
touching it. It is now possible to store the name of
your network via the "Selection" parameter. When
doing so you can choose between upper and lower
case letters, numbers or special characters such
as ?/&/%. To do so, press the "Selection" icon mul-
tiple times.
*************
1
Fig. 35: Enter SSID
1: Letters, numbers and special characters for
entry in the respective line.
Select "Next" to proceed to the next letter or
number for entry, e.g. the password or network
name.
After entering the complete password or WLAN
name, touch "OK" to save the entry.
Touching the "Cancel" icon completely cancels the
entry.
REMKO Smart-Control Touch
40
