3
Operation -
General notes
Overview of the controls
1
2
3
4
Fig. 1: Smart-Control Touch start screen
1: Overview (quick access)
2: Information (quick access)
3: Settings (quick access)
4: Messages (warnings, information notes and
errors)
Function display
Unit operation is intuitive and self-explanatory via
the plain text display on the user interface on the
touch display. No buttons are required to adjust
and change parameters. Instead, this takes place
by touching the surface of the controller at the
appropriate points. The installation of further func-
tions such as Smart-Count or Smart-Web is pos-
sible through the installation of further supplemen-
tary software available as an accessory.
When in an idle state, the display is inactive. The
basic display only starts once the display is
touched and it always starts with the user level.
Selecting user/expert mode
You can access the expert level by touching the
REMKO logo in the upper right corner of the dis-
play. After entering the password (0321) using the
+/- combination and then touching the "Next" and
"OK" displays, the expert level is enabled.
NOTICE!
The settings in expert mode may only be con-
figured by REMKO-authorised installers!
Navigation and changing parameters
Call up basic display
The menu items "Overview", "Information", "Set-
tings" and "Messages" are displayed in the basic
display (start screen).
Fig. 2: Overview
REMKO Smart-Control Touch
8
