REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual EXELLE JUNIOR 43
SERVICE MANUAL
SEAT WIDTH ENLARGEMENT
Standard and Dynamic 2.0 rear frame
Put the rear wheel on and position the side guard as it was before removing the parts (you can have a look at the side guard on the other
side of the wheelchair).
Tighten the plate
C
with the bolts
B
. If one was not accessible, remove the rear wheel, fix the second bolt
B
and screw the bolt
A
just
enough to be able to vertically slide the side guard, but also to let it hold its position.
When all bolts are accessible even with the rear wheel on, operations result quicker. These instructions do not consider this convenient
case.
Put the rear wheel on and vertically slide the side guard to the correct position.
Remove the wheel and tighten the bolt
A
.
Tigthen the two bolts/washers/nuts
B
.
Now, it is necessary to check the gap between side guard and rear wheel and decide whether or not, to add spacer on the wheel receiver
.
In such case, remove the wheel receiver and add 3 and/or 6 mm spacers.
Advice: before removing the receiver, it is useful, as a try, put the spacer on the axle of the wheel and put it on. This way, you will immedi-
ately see what spacer you need.
A
B
C
