REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual EXELLE JUNIOR 34
SERVICE MANUAL
FOOTPLATE POSITIONING LEVER
V2
V2 + D
V2 V2
V1+D V1+R
V3 R+D
V1
V1+D
V1 +R
L
= 2 mm half-moon spacer for dm 25 tube (to be put between
the frame and the lever
when at least one fixing hole is not a
“common hole”.
D
= spacing buckle L 26 mm
C
= lock nut M5
R
= flat washer 5mm
V1
= boltTCEI 5 x 40
V2
= bolt TCEI 5 x 35
V3
= bolt TSPEI 5 x 35
V2
V1 + R
R + C
V2
V1 + C
V3
V2
V2 + C
V3 R + C
V1
V1 + C
V1 + R
If the positioning lever is to be fixed to one or both common holes with the fork support clamp, remove the lever likewise above mentioned.
In the common holes, remove the bolt
V3,
then:
•
if the lever is to be fixed through two common holes, then the spacer
L
is not needed because the lever will lean on the flat face of
the clamp.
•
if the lever is to be fixed through one common hole, position the spacer
L
just above or just below the clamp (according to the neces-
sary adjustment) and fix the parts.
Note: according to how the parts are assembled to one another, the bolts changes
–
see nere below.
According to the necessary combination, the quantity of the cylindrical spacer
M
changes; therefore, you will have to add or remove one or
two of them (they can be 2, 3 or 4 each side).
Each wheelchair is provided with a “kit of screws”, which includes all the remaining screws that are necessary to be able to
assemble the
parts in any possible combination.
