REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual EXELLE JUNIOR 16
SERVICE MANUAL
REAR HEIGHT ADJUSTMENT
Dynamic 2.0 rear frame
For the adjustment of the fork angle and the removal of the fork support,
see chapters “fork angle” and “fork support position”
Adjustment every 1,5 cm
You can adjust the rear height by changing the position of the receiver
A
on the
plate
B
.
Screw off the nut
C
,remove the receiver and insert it in another hole.
Pay attention to the position of the toothed washer
D
and to the spacers
E
(if any).
Securely fix the receiver.
If you lower the rear height, then you have to remove the mudguard (if present)
before inserting the rear wheel; in fact, the wheel will touch the mudguard.
After adjustment, adjust the mudguard and the brake, too.
Remember that the rear height affects the seat inclination, thus, it is necessary to
check and adjust the front fork angle.
Should the receiver be with camber, make sue to adjust the convergency
—
see
chapter “camber”.
A
B
A
C
C
A D
E
