REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual EXELLE JUNIOR 33
SERVICE MANUAL
FOOTPLATE POSITIONING LEVER
Follows next page
- Height adjustment along the frame
Remove the bolts/washers/nuts of the fixing points
D
and
E
and remove the unit lever/footplate.
Remove the spacer
C
and the two spacing buckles
F
.
To remove the spacing buckle
F
you may need to
gently use a hammer and a pin punch.
Choose the new position on the frame and insert
the spacing buckle
F
through each fixing point.
Position the spacer
C
, mount the lever and fix it
with the bolts/washers/nuts
D
E
.
- Orientation
The lever
A
can be assembled in four orientations:
high-front; low-rear; low-front; high-rear.
In order to perform such operation, remove the two
fixing points (you do not need to remove the spac-
ing buckle
F
and the spacer
C
if you keep the same
fixing points on the frame) and mount the lever
opposite vertically.
However, by doing that, (as from 1 to 2 in the pic-
tures), you also change the horizontal orientation.
To keep the horizontal orientation, ( as from 1 to 3
or from 2 to 4), you need to exchange the two sup-
ports. The levers, in fact, are not ambidextrous.
With curved three angles footplate positioning lever (unitl 2018)
- Inclination
Besides that possibility, you can fix the lever using any of the three holes
F
. This way you actually change the angle and you can get three
different depths. To perform such adjustment, remove the bolt fixed through the hole
F
and loosen the other. Then, turn the support until
aligning one of the two other holes
F.
Insert and fix the bolt you removed. Finally tighten the other bolt.
-
Fixing through “common holes”
Differently from the “L
-
shaped” lever, this lever
does not allow for 1.5 cm step adjustment inde-
pendently from the position of the fork support.
In several cases, thus, the assembly of this lever
occurs through one or both holes used to fix the
fork support clamp. We can call such holes
“common holes”.
D
E
F
A
F
C
1 2 3 4
one common hole one common hole two common holes
