REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual EXELLE JUNIOR 22
SERVICE MANUAL
SIDE GUARD
Rotative system
It is advisable to pread a drop of
mild lock thread glue on the grab
screws
C
and
G
and on the bolt
F
.
B
ROTATION OF THE SIDE GUARD ON THE RING
Loosen the nut
B
, the bolt
F
and the grab screws
G
. That will allow rotating the side guard pivoting it
on the ring. To rotate the side guard, hold the ring with one hand and turn the side guard with the
other hand.
If the bolt
F
is not accessible, loosen the two grab screws
C
and turn the whole system (as explained
in the paragraph
A
) until this bolt becomes accessible. To do so, slide the wheel off be 3 cm approxi-
mately to avoid the interference, or remove it.
C
POSITIONING THE SIDE GUARD
Remove the rear wheel and, working on two rotations above mentioned, take it to its maximum height
and put the wheel back on.
Now, working again on the two rotations, position the side guard at approximately 5 mm from the tyre.
F
B
F
G
C
