49
5. Service
Menu
Warning:
Service menu is intended for a specialist only. Layman adjustments of parameters in the
Service menu may lead to damage to parts of the heating and solar thermal system.
In the Basic menu, the Service option shall be selected in order to enter this section, and confirmed by
ENTER.
By repeated pressing
ENTER
you move between password digits. The digits not being edited are not
visible and are shown as *. After all digits have been entered, press
(down arrow) to enter Service
menu. The default service password is: 1234.
It is highly recommended to change the default password to your own!
The Service menu consists of these items:
zone 1
........................ setting service parameters for Zone 1
zone 2
......................... setting service parameters for Zone 2
HVAC unit
.................. setting service parameters for HRV Zone
floor drying
................ setting service parameters for floor drying program
solar
............................ setting service parameters for solar thermal system
heat pump
.................. setting service parameters for heat pump
HP operat. data
.......... detailed info on heat pump
HP blocking
............... detailed info on heat pump
source on/off
............. setting service parameters for ON/OFF source
source OT
.................. setting service parameters for source with OT communication
DHW
............................ setting service parameters for DHW heat. by a heat pump
DHW-E
........................ setting service parameters for DHW heat. by an auxiliary source
ThStore
....................... setting service parameters for thermal store heating
sensors
...................... temperature sensors management (offset, sensor condition)
other
........................... setting other service parameters
module Fire
................ setting parameters for Fire add-on module
UNI function
.............. setting parameters for a universal function
UNI function 2
............ setting parameters for a universal function 2
CIB addresses
........... setting HW addresses for CIB devices
IP address
.................. setting IP address, network mask, default gateway, DNS server
RegulusRoute
............ setting RegulusRoute service
test
.............................. controller output tests
