35
4.5.3. Fire, solid fuel boiler
The heat source can be switched on or off with the
ON/OFF
button.
Control of solid-fuel boiler pump, or possibly fireplace combustion-air damper. The Solid fuel
boiler function requires an add-on module and needs to be enabled on the service level.
Pump control difference
ON
............................... Switch-on difference. If the actual temperature measured by the boiler
sensor rises by the value of the switching difference above the thermal
store temperature, the pump is switched on.
OFF
............................. Switch-off difference. If the difference between the boiler and thermal
store temperatures is lower than the value of the switch-off difference,
the boiler pump is switched off.
Current measured values on
the control sensors for
switching the boiler pump.
Status of boiler pump and air supply damper -
displayed as a percentage of air supply opening or
closing (100% fully open, 0% closed).
Differences for boiler
pump control.
Limitation of the minimum temperature at the boiler
sensor for switching on the pump and of the maximum
temperature of the thermal store for switching it off.
