23
4.2.
Display of the Diagram (DIAGRAM)
Schematic representation of your hydraulic connection with a clear display of important
quantities, states and information. The diagram should therefore always correspond to your
current hydraulic connection.
To get a proper presentation in the mobile application, it is necessary to rotate the device to
landscape view.
Shown in the upper left corner
OUTDOOR TEMPERATURE
...Display of the current outdoor temperature.
HC pressure
............... Display of the current pressure in the heating system.
RIPPLE CONTROL STATUS
...if Ripple control is applied for the controller, the current status
will be displayed here according to the distributor rate
(HIGH/LOW)
.
HOLIDAYS
.................. here it is displayed whether or not the holiday function is active. This
function allows you to adjust the heating temperature of the individual
zones and the hot water to a lower value during a longer stay outside
the heated building, without changing the permanent settings in the
individual zones. Holidays are controlled in the HEATING menu.
Temperatures
without brackets:
real (measured)
temperatures.
Temperatures in
brackets
: desired
temperatures.
These icons provide quick
access to the settings of
each system element,
depending on the location of
the icon.
Heat pump inlet and
outlet temperatures
and compressor
operation indication.
The arrow shows the operation of
the heat pump, in this case
heating. When DHW is being
heated, it will point to the top of the
tank.
