25
When the outdoor temperature drops below -2 ° C, comfort mode is automatically activated.
This function is designed to save energy so that it does not switch on an auxiliary bivalent
source in the event of a sudden request for a higher zone temperature. This function can be
switched off on the service level.
Time program settings
Zone off during setback
.................................... This permits to switch off the heating zone completely in setback mode.
The circulation pump stops and the mixing valve closes.
Use time program
.................................... Activation of the time program for switching the heating zone mode
between comfort and setback. If this option is switched off, the heating
zone is controlled only by the set comfort temperature.
For underfloor heating systems, we recommend switching off the time program.
Use second period
.... Use the second period of the time program. Allows a second transition
between setback and comfort mode and back.
Pre-set time periods can be easily overwritten.
The following buttons are meant to copy easily the set values to further days:
COPY Mo TO
Mo-Fr, Mo-Su and COPY Sa TO Sa-Su
.
Winter / Summer function settings (blocks heating in summer)
When activating
HEATING BLOCKED IN SET PERIOD
, set the date of the beginning and end
of the period when heating will be always blocked, disregarded of the current outdoor
temperature.
When activating
HEATING BLOCKED BY OUTDOOR TEMPER.
set the time intervals for
the preset outdoor temperatures after which the heating will be blocked (summer mode will be
enabled) and the heating will be unblocked (winter mode will be enabled).
Another condition for automatic mode switching is reaching the required indoor temperature.
This means that if the indoor temperature is lower than required, then there will be no automatic
switch to summer mode. Similarly, there is no automatic switch to winter mode if the indoor
temperature is higher than required.
