29
Building underheating at temperatures below zero
If a building underheats at an
outdoor temperature below zero,
the heating water temperature
shall be increased with the plus
button. The graph shows that the
heating water temperature will be
adjusted mainly at temperatures
below zero.
Expert settings are intended for more experienced users, there are two pairs of plus and minus
buttons.
One for temperatures above zero and the other for temperatures below zero. By clicking on
the individual buttons, the OTC curve is readjusted, especially in the values corresponding to
the location of the buttons according to the graphs above.
NEW TEMP.
................Displays temperatures adjusted by the buttons at the current outdoor
temperature.
SAVE CHANGES
........
Confirmation of changes made, saving them to the controller's
memory.
CANCEL
.....................
Return of values, cancelling current changes.
RESTORE FACTORY SET.
.................................... Reset of the OTC curve to default values.
The expert setting is fully linked to the basic OTC curve setting and all changes are reflected
in the zone setting.
Note: When setting the curve on the mobile phone, keep it in a horizontal position. (This
item may not appear on the display in the vertical position.)
