4
The keys
,
are used to browse in the menu. In order to edit a parameter, press
ENTER
and a cursor appears on the parameter. The values of numeric parameters can be
increased/decreased by pressing
/
keys. Selection parameters (e.g. ON/OFF) are chosen
by pressing keys
,
. When finished, pressing
ENTER
will move the cursor to the next
parameter in the same display. Parameter editing can be also exited without saving by pressing
the key
ESC
.
1.1. Basic
User
Menu
Pressing
ESC
in the basic User menu will always bring back the first – basic display.
1 – outdoor temperature
2 – weekday and time
3 – temperature in zone (if room temp. sensor is used)
4 – heating water temperature (if no room temp. sensor is used)
5 – temperature in thermal store
6 – temperature in DHW storage tank
Heating zone display (zone 1, zone 2):
1 – zone state (information on the current heating zone state)
2 – current and desired room temperature (if no room sensor is used, the data is shown as 0.0)
3 – adjustment to the desired room temperature. When a room unit is used, “PJ“ appears and the
adjustment made by this unit is shown.
1
2
