Regal 29 OBX, Owner'S Manual

Page: 184 / 324

Equipment Operation
Ü Ý Þ ß
DRAIN PLUG
Your boat is equipped with a drain plug centrally located on the
transom below deck level. Make sure it is installed tightly before
launching. Tighten with a small amount of machine torque but do
not overtighten it as the thread material is nylon and can be stripped.
Do not use
your fi ngers alone to tighten it. After your outing, while
the boat is angled on the ramp, remove the drain plug to eliminate any
bilge water accumulation. If the water stream is diminished, check
for foreign objects stuck in the drain hole. Pull the drain plug if dry
storing the boat for extended periods, especially in colder climates.
Refer to the vessel operation chapter for pre-departure use. Refer to
the storage and winterization chapter for storage information. Review
the trailering section for pre-launch and post-trip instructions.