Refraction Technology 130-01, Operation Manual

Page: 51 / 114

Doc-1301-Ops Rev 2.9.1 10/30/08
Refraction Technology, Inc. 37
2.6.4 Write Parameters to disk (WP)
The Write Parameter (WP) command causes the DAS to save the current
user-accessible parameters to each disk currently installed in the DAS for
later use if necessary.
Note: The parameter file is always saved with Acquisition ON.
To write a parameter file from the DAS to each disk:
1. Select the DAS LP/WP button.
Be sure the Acquisition is ON.
2. Select the Write button to write the DAS parameter file.
Figure 16 Write (WP)
3. Select the OK button to approve the write operation.
Note: It is also possible to Write or Load a parameter file during the DAS
configuration operations by using the DAS LP/WP command on the configuration
menu.
Write
Parameters