130-01 Operations
Refraction Technology, Inc.
28
2.2.2
Power up the 130-01 DAS
1.
Power up the PDA device.
Note: Since the PDA unit has RAM, it can potentially open to the screen it was last
displaying when it was last powered-down. Reset the PDA to the PFC_130 icon by
touching the Home button on the PDA.
2.
Turn on the supply to apply voltage to the 130-01 Recorder and to your control
interface.
Note: Wait at least 20 seconds and the LCD display should display the following:
Figure 3 LCD Display
Unit ID
Firmware
Version
Firmware
Date
Summary of Contents for 130-01
