Refraction Technology 130-01, Operation Manual

Page: 59 / 114

Doc-1301-Ops Rev 2.9.1 10/30/08
Refraction Technology, Inc. 45
16. In the Generic NULL Modem Properties window on the General tab – click the
Maximum Port Speed drop-down menu and select the maximum baud rate
setting.
Note: The baud rate settings MUST match the configuration of the connected
equipment.
ƒ
For direct connection to the 130, the baud rate the 130 is configured to.
ƒ
For direct connection to a 72A with the RT422 board, the RT422 board is configured
at the factory to 9600 but can be changed. Reference the RT422 Asynchronous Serial
Communications Card (Board Document) for additional information on the jumper
configurations that support the baud rate setting.
ƒ
For connection to a DAS thru a radio or other equipment, consult their operations
manual.
17. Click OK when ready.
Figure 24 Modem Properties
18. In the Phone and Modems Options window click the OK button.
19. At this point the PC needs to be restarted. Using standard operations restart the
PC.