Reebok B6e-IWM, Manual

Page: 37 / 79

GB
P 13: WATT control program
WATT setting
After the user has selected “P13” and pressed “ENTER” button. The “WATT” display will show a default digit“110”. Press
the “up and down” button to adjust the “watt ” value from 10 to 400W, press the “Enter ” button to continue the
program.
TIME
After you have set up the WATT, press the “ENTER” button. The TIME display will show the workout time setting of
“32:00 ”, press the “UP and DOWN” button to adjust the time, press the “ENTER” button to to save
When the user presses the START button, the LCD display shows the WATT profile based on the user´s settings.
To increase or decrease the selected WATT while exercising, press the “UP and DOWN” button, the program will count
down time form the preset time, and DISTANCE, CALORIES will count up from zero.
To pause the program while exercising, press the “STOP” button. To quit out the program, press the “STOP” button twice.
At the end of the program when the target has been achieved, the computer will beep.
Metric (KM) to English (ML) conversion
The computer display can show both English and Metric information, if you want to change from the Metric to English,
Please follow the below procedure:
When the computer is in the POWER ON status. Press and hold the “STOP” button then press the “UP” button, the LCD
will show the “KM/H” or “MPH”. Select set KM/H or MPH by pressing the UP/DOWN button, and then press the ENTER
button to confirm.
It was showing “KM/H” unit if the user do not set up the program. The computer will show distance with the unit which
the user setting. The computer just can use the “UP” ”DOWN” “STOP” button when setting the program.