Redmond RMC-M90FR, Manual

Page: 38 / 80

38
I. PRIOR TO FIRST USE
Carefully unpack the device, remove all packaging materials and stickers except the one with the unit’s serial number. The absence of the serial
number will deprive you of your warranty benefits. Wipe all interior and exterior surfaces of the unit with a soft, damp cloth. Wash the bowl with
warm soapy water. Rinse and dry thoroughly. Odor on first use of the appliance is normal. In such case, clean the device.
CAUTION! Do not use the appliance in case of any malfunctions.
II. OPERATION
Before Use
Place the device on a flat, stable, and hard surface away from any objects or cabinets that could be damaged by steam, humidity, or high temperatu -
res.
Before operating, make sure that the outer and inner parts of the multicooker have no dents, cracks or any other visible damages. There should not
be any obstructions between the heating element and the bowl.
Setting The Cooking Time
Multicooker REDMOND RMC-M90FR allows manually adjusting the cooking time, set by default for each program (except “EXPRESS”). Time adjustment
range and interval depend on the program of cooking selected. To set:
1. Select the cooking program. Press “Heure” button repeatedly to adjust the hours. Hold the button down to scroll through the digits.
2. Press “Min” button repeatedly to adjust the minutes. Hold the button down to scroll through the digits.
3. To set the cooking time of less than 1 hour press “Heure” button repeatedly to reset to zero. Adjust the minutes using “Min” button.
4. When the time is set (display keeps blinking) proceed to the next stage in accordance with the program selected. To cancel all settings, press
“Réchauffer/Annuler” button and reset.
Manually adjusting the cooking time, consider time adjustment range and interval of selected program, given in the table of default settings.
For your convenience the cooking time range in all programs starts with the minimum setting, enabling you to prolong the operating time of the program,
if the dish is undercooked.
In certain automatic programs countdown starts only when the device reaches its operating temperature. E.g. If you set “VAPEUR” program on 5 minutes,
the countdown of the program begins only when the water comes to a full boil providing enough steam. In “PÂTES” program, the countdown begins after
water starts boiling and “Départ” button is being repressed.