22
VII. BEFORE CONTACTING A SERVICE CENTER
Error code
Error description
Error handling
Е1–Е3
System error. Possible control board or temperature
sensor failure.
Unplug the appliance and let it cool down. Close the lid. If this does not eliminate the
error, contact an authorized service center.
Problem
Possible Cause
Solving the problem
The appliance does not switch
on.
Voltage supply failure.
Check the voltage supply.
The meal is taking too long
to cook.
Voltage supply interruption.
Check the voltage supply.
The bowl is installed with a distortion.
Install the bowl properly.
There is a foreign object between the bowl and the
heating element.
Remove the foreign object.
The heating element is dirty.
Unplug the device and let it cool down. Clean the heating element.
The packaging, user manual, and the device itself may not be treated as household waste. Instead, it shall be taken to the applicable collection point for
the recycling of electrical and electronic equipment.
© REDMOND. All rights reserved. 2015
Reproduction, transfer, distribution, translation or other reworking of this document or any part thereof without prior written permission of the legal
owner is prohibited.
Summary of Contents for RMC-M150A
Page 2: ...ENG 6 FRA CAN 23 ESP 41...
Page 3: ...3 4 5 1 2 14 10 9 160 120 11 12 6 15 8 7 13 A1...
Page 59: ...59 RMC M150A ESP...
