AN-30e
user manual
70-00035-01
Proprietary Redline Communications © 2004
November
16,
2004
Page 11 of 103
1.4 FCC
Notice
1. The System is used as a fixed wireless Ethernet bridge that requires professional
installation with specified antennas and output power levels certified under the
FCC Grant for System for point-to-point mode of operations.
2. FCC RF Exposure Requirements: T-54 and T-58: The antenna(s) used for these
radios must be fixed-mounted on outdoor permanent structures. In point-to-point
applications each antenna must be separated from all persons by a distance of at
least 2.5 meters. In point-to-multipoint applications each antenna must be
separated from all persons by a distance of at least 20 centimetres.
3. The System is certified by the FCC and Industry Canada with the 5.4/5.8 GHz
directional and parabolic antennas listed in the Appendix of this manual.
4. For fixed, point-to-point mode of operations, the transmitting antennas must be
directional as specified in this Users Manual; the use of omni-directional antenna
is prohibit for point-to-point operation.
5. For Class A Unintentional Radiators: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required
to correct the interference at their expense.
6. Warning: Changes or modifications not expressly approved by Redline
Communications Inc. could
void the authority of the user to operate the
equipment.
