RED DSMC OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC
955-0020_V5.2, REV-G | 35
INSTALL THE MODULE ADAPTOR
You must install an adaptor module on the back of the BRAIN before you install a DSMC module.
REQUIRED TOOL:
T20 Torx
®
driver
1. Turn off the BRAIN.
2. Remove the REDMOTE, if attached.
3. Position the Module Adaptor over the V-mount on the rear of the BRAIN.
4. Apply pressure and tighten the four (4) captive screws in a cross pattern (“X” pattern) approximately two (2)
turns each using a T20 Torx driver. DO NOT FULLY TIGHTEN.
5. Fully tighten the four (4) screws in a cross pattern (“X” pattern). DO NOT OVERTIGHTEN.
Install Module Adaptor
Install Screws
Summary of Contents for DSMC DRAGON
