COPYRIGHT © 2014 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.2, REV-G | 148
MASTER/SLAVE OPERATION
This section describes operation in Master/Slave configuration and clip naming conventions for clips recorded
on those cameras. Master/Slave is the most common configuration for Stereo/3D productions.
When cameras are operated in Master/Slave configuration, you can perform the following operations:
Power:
Turn off the Master camera to turn off both cameras.
Record:
Press the
PWR/REC
button on the Master camera to start/stop recording on both cameras.
Change settings:
Change settings on the Master camera, to change settings on the Slave camera.
NOTE:
The Master camera controls metadata and basic camera parameters of the slave cameras. Any other
setting changes required by the Slave cameras must be made before recording.
SET UP MASTER/SLAVE OPERATION
1. Connect cameras using a Master/Slave Gig-E Cable.
2. On the Master camera, follow the instructions below:
A. Go to
Menu
>
Settings
>
Setup
>
Communication
.
B. Type a name for the camera (Example: CAM A, LEFT, MASTER, etc) in the
Name
field.
C. Set
Target
to
All
.
D. Go to
Menu
>
Settings
>
Setup
>
Communication
and select the
Ethernet
tab.
E. Verify the
Enable Camera to Camera
check box is selected.
3. On the Slave camera(s), follow the instructions below:
A. Go to
Menu
>
Settings
>
Setup
>
Communication
.
B. Type a name for the camera (Example: CAM B, RIGHT, SLAVE, etc) in the
Name
field.
Master Settings
Summary of Contents for DSMC DRAGON
