RED DSMC DRAGON Operation Manual Download Page 22

Page: 22 / 197

RED DSMC OPERATION GUIDE

955-0020_V5.2, REV-G | 22

RED BATTERIES AND CHARGERS

This section describes the RED lithium-ion batteries and charger solutions.

The REDVOLT, REDVOLT XL, and RED BRICK are lightweight, rechargeable lithium-ion battery cells that provide

sustained power to the BRAIN. These batteries provide long-term mobile power and attach to the BRAIN via

a DSMC power module or other RED accessory, such as the DSMC Side Handle. RED chargers replenish lost

capacity for REDVOLT, REDVOLT XL, and RED BRICK batteries.
RED offers the following batteries and chargers:

ITEM

PART NUMBER

REDVOLT

740-0020

REDVOLT XL

740-0021

RED BRICK

740-0002

REDVOLT Travel Charger

790-0134

REDVOLT Charger (Quad)

740-0015

RED CHARGER

740-0006

For more information, see the

DSMC Power Operation Guide

, available at

www.red.com/downloads

REDVOLT XL (left) and REDVOLT

(right)

Summary of Contents for DSMC DRAGON

































































































































































































Search results

Summary of Contents for DSMC DRAGON

Reviews:

Related manuals for DSMC DRAGON

Brands by name

Popular brands

RED DSMC DRAGON, Operation Manual

Search results

Summary of Contents for DSMC DRAGON

Reviews:

Related manuals for DSMC DRAGON

Brands by name

Popular brands