COPYRIGHT © 2014 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.2, REV-G | 162
INCORRECT COLOR TEMPERATURE
SYMPTOM
The camera color temperature is off and the image looks warmer or cooler than normal.
POTENTIAL RESOLUTION
Perform an auto white-balance. For more information, go to
“Color Temperature” on page 71
.
Perform a black shade calibration. For more information, go to
.
If you have the DSMC Interchangeable OLPF system installed, verify that you have the correct OLPF
selected in the OLPF menu. For more information, go to
AUDIO NOT RECORDED
SYMPTOMS
Audio channels do not display in the Audio Meter.
Cannot hear audio during playback.
Audio is not embedded in R3D file.
EXPLANATION
The DSMC disables recording audio when Varispeed or a special recording mode is enabled. The DSMC passes
audio to the headphones even if audio is not recorded.
POTENTIAL RESOLUTIONS
Perform one (1) of the following to enable recording:
Select an audio source
: Go to
Menu
>
Settings
>
Audio
and select a source from the
Source
drop-down menu.
Disable Varispeed mode
: Go to
Menu
>
Settings
>
Project
>
Frame Rate
and ensure the
Sensor Frame Rate
matches the
Project Time Base
.
Disable special recording modes
: Go to
Menu
>
Settings
>
Recording
>
Mode
and select
Continuous Record
from
the
Recording Mode
drop-down menu.
Disable frame processing
: Go to
Menu
>
Settings
>
Recording
>
Frame Processing
and select
No Frame Processing
from the
Frame Processing Mode
drop-down menu.
OFFLINE CLIPS AND AN EXTRA R3D FILE
SYMPTOMS
After mounting an SSD to your computer, REDCINE-X PRO shows that all or most clips are “Offline”.
The RDC folder for a clip shows two R3D files. The first R3D file is very small (a few kilobytes).
EXPLANATION
A “phantom” R3D file sometimes results from either of the following:
Using Pre-Record
: An extra 12 KB R3D file is created when pressing the Record button too quickly.
Using an external start/stop trigger
: An extra 12 KB R3D file is created. This file is very small (a few kilobytes).
In both situations, the expected R3D file is also in the RDC folder, and is completely intact.
POTENTIAL RESOLUTION
Delete the “phantom” file from the RDC folder on your computer. After deleting the file, your clips will load
correctly in REDCINE-X PRO.
Summary of Contents for DSMC DRAGON
