RED DSMC OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC
955-0020_V5.2, REV-G | 37
4. Insert the HDMI connector into the
HDMI
port on the BRAIN.
5. Apply pressure and tighten the four (4) captive screws in a cross pattern (“X” pattern) approximately two (2)
turns each using a T20 Torx driver. DO NOT FULLY TIGHTEN.
6. Fully tighten the four (4) screws in a cross pattern (“X” pattern). DO NOT OVERTIGHTEN.
REMOVE THE +1 ADAPTOR MODULE
REQUIRED TOOL:
T20 Torx driver
1. Turn off the BRAIN.
2. Use a T20 Torx driver to loosen the four (4) captive mounting screws that attach the +1 Adaptor Module to
the BRAIN.
3. Disconnect the HDMI connector from the BRAIN.
4. Remove the +1 Adaptor Module from the BRAIN.
Insert the HDMI
Connector to the
BRAIN
Install screws
Summary of Contents for DSMC DRAGON
