RCJOSEB PVCore, Manual

Page: 37 / 107

THE PVCore 3D PRINTER
12/28/2016 BY RCJOSEB PAGE 37 OF 107
Z AXIS SLIDE PARTS:
The Z axis slide is assembled with the following parts:

01 x 3D printed Z axis slide (Z2).

02 x 0.25” x 12” threaded rods (T0.25).

02 x Metal LM6UU linear bearings )LM6UU-M) or 3D printed LM6UU linear bearings (LM6UU-3D).

02 x 6mm x 12” smooth rods (S6MM).

02 x 5/16” hex nuts (N516).

04 x #6 x 0.5” Phillips pan head screws (S0.5).

12 x 0.25” flat washers (W0.25).

12 x 0.25” hex nuts (N0.25).

01 x 14” x 5/16 threaded rod (T516) which is not shown in the picture.