31
ENGLISH
DMU 6100 FRONT PANEL
1
Main switch.
2
“ON” LED.
3
PLAY (green) / REC (red) LED.
4
7 LEDs: “SIGNAL / PEAK” of the 6 inputs IN TELECONF. IN and the MAIN OUT output.
5
PLAY / REC selection key.
PLAY: the
SYSTEM
audio output for recording is disabled.
REC: the
PLAY
audio input is disabled.
6
SET key to enter the configuration menu and select the relevant parameters;
press and hold for
3 seconds to enter.
7
Backlit LCD.
8
IN VOLUME key to enter the audio input volume menu and select the relevant parameters.
9
OUT VOLUME key to enter the audio output volume menu and select the relevant parameters.
10
MODE key to enter the operating mode menu and select the relevant parameters.
11
Keys : when the LCD displays the default page (indicating the operating mode), these keys
allow to adjust the internal loudspeaker volume (see point 14). After entering a menu (by means
of the SET, MODE, IN VOLUME and OUT VOLUME keys), these keys change the value of the
selected parameter.
12
Press the ENTER key to confirm and save new settings.
Without pressing it (note: after some time, the selected menu will automatically quit):
• changes are
not saved
in the SET and MODE menus;
• changes are anyway saved in the IN VOLUME and OUT VOLUME menus.
After entering the configuration menu (SET), the ENTER key also resets the entire system (and
stops the discussion in progress). When necessary, the system reset can be forced by pressing
and hold the SET key for 3 seconds and then ENTER (for instance, after adding another console
DMS 6410).
13
Headphones jack socket (6.3 mm – 1/4”); the internal loudspeaker is off when this jack output
is used.
14
Internal loudspeaker for audio monitoring of the MAIN OUT output.
5
1
2
3
4
6
8
9
10
7
11
12
13
14
