RBI Infinite Energy2 IW1000, Installation And Operation Instructions Manual

Page: 124 / 156

124
Appliance MODEL 199
Category of discharge chimney II and IV
Maximum heat input Btu/hr 199,500
Minimum heat input Btu/hr 50,000
Turndown ratio 4:1
Number of burners 1
Gas flow rate (Natural gas) ft3/hr 199.5
Gas flow rate (LP gas) ft3/hr 80
Min / Max gas pressure (Nat. and LP) In.W.C. 3 / 13
Min / Max water temperature °F 68 / 180
Min / Max water pressure PSI 8 / 160
Minimum water flow with motorized valves GPM 11
Minimum water flow without motorized valves GPM 11
Content of water gal 1.7
Supply voltage / Frequence 120Vac 60Hz
Absorbed electric power W 110
Air intake / Flue gas pipes diameter inch 3
Max. length venting system ft 120
CO (Carbon monoxide) with natural gas ppm <150
CO (Carbon monoxide) with LP gas ppm <250
NOx (0% O2 with natural gas) ppm <30
CO2 (Carbon dioxide) for Natural gas at high fire % 8.4 to 8.7
CO2 (Carbon dioxide) for Natural gas at low fire % 8.4 to 8.7
CO2 (Carbon dioxide) for LP gas at high fire % 9.5 to 10
CO2 (Carbon dioxide) for LP gas at low fire % 10.5 to 11.5
O2 (Oxygen) for Natural gas at high fire % 5.9 to 5.4
O2 (Oxygen) for Natural gas at low fire % 5.9 to 5.4
O2 (Oxygen) for LP gas at high fire % 6.4 to 5.6
O2 (Oxygen) for LP gas at low fire % 4.8 to 3.4
Ionisation current uA (Micro Amps) 4 to 7
Maximum flue gas temperature °F 203
Max. negative pressure allowed in the fumes
exhaust/intake system
InWC 0.2
Maximum water condensate flow GPM 0.032
Average acidity of condensation PH 4
Appliance weight (empty of water) lb 211
Recovery Rating (100°F rise) Gal/hr 227
DHW delivery (75°F rise) GPM 5
17 - TECHNICAL DATA