OPERATION
AUTOPILOT
NautoPilot 5000 Series
65
4002.DOC010102
Edition: September 2014
Table 8
Softkeys for “NP 5000 Actual Rudder” display
Function
Figure 32/1
Display with graphic information on the actual rudder angle
Figure 32/2
Information on heading source and actual heading value.
Figure 32/3
Set heading value.
For Course Control this display is designated as “Presel.COG”
(Preselected Course Over Ground) after turning the rotary
knob, “Set COG” after releasing the knob (in increments of 1
degree or 1/10 degree -- depends on selected resolution).
For Track Control this display is designated as “Track Course”.
For Heading Control this display is designated as “Set Head-
ing”.
Figure 32/4
Touch--icon, toggles resolution for the respective value.
Figure 32/5
Numerical display for the ruder angle in degrees, an arrow next
to this display shows the direction of the rudder angle.
For two rudders a second numerical and graphical information
is displayed.
Figure 32/6
Softkey for switching to the main display.
