OPERATION
NautoPilot 5000 Series
38
4002.DOC010102
Edition: September 2014
1.4.5.1.6
End of Track
Via marking the last track point at the ECDIS, the track controller (Autopilot) recognizes
the end of a track.
Indications
Comment/Notes
An alert is displayed at the top bar of the display (see section 6).
T r a c k E n d x min
two pulses
x minutes left to the last track point.
Acknowledge the alert.
An alert is displayed at the top bar of the display (see section 6).
T r a c k E n d P a s s e d
Change Steering Mode
three pulses
repeated every
7 seconds
Last track point reached and passed.
Both messages swapping.
Acknowledge the alert.
T r a c k E n d P a s s e d
The alarm comes up every 7 seconds
until having changed--over to another op-
erating mode, e.g. Heading Control or
manual control (tiller or steering mode
selector switch).
Attention:
Before a mode change (e.g. Heading Control) is performed, the ship continues
moving along the extended track with the operating mode “Track Control”!
