OPERATION
AUTOPILOT
NautoPilot 5000 Series
131
4002.DOC010102
Edition: September 2014
Please note:
Dimming changes at the active NautoPilot Operator
Unit are for all connected (inactive) NautoPilot Oper-
ator Units.
A dimming change at an inactive NautoPilot Operator
Unit is executed at this NautoPilot Operator Unit only.
The adjusted dimming value is executed for all con-
nected NautoPilot Operator Units if the inactive one is
switched to an active unit.
Figure 59: Principle of master slave NautoPilot Operator Unit
Master (active)
Slave 1 (inactive)
Slave 2 (inactive)
LED green
Example:
Master is in ”Heading Control” mode
LED yellow
Master (inactive)
Slave 1 (active)
Slave 2 (inactive)
(Controller)
LED yellow
Example:
Master is in ”Heading Control” mode but inactive.
Slave 1 is active
LED yellow
LED green
(Controller)
