PILOTSTAR D
4--18
3060.DOC012
Edition: March 13, 2009
Mounting the transmission element:
Linkage transmission
By loosening the hexagonal screw on the pulley, the pulley position can adequately
be corrected.
Toothed--belt transmission
The toothed belt can directly be applied.
Pay attention to the belt tension indicated in the dimensional drawing.
Following the adjustment/mounting, the test lines are to be removed.
4.8.1.1
Adjusting the Limit Switches of the Feedback Unit
(See Feedback Unit PCB 101--529 HP010)
The limit switch relay of the feedback unit (PORT and STARBOARD) have to react
switch before the mechanical limit stops of the steering gear.
Port limit switch relay:
Adjust the rudder by manual control for the desired cut--off angle.
Turn the potentiometer R2 until H2 LED is switched off.
Starboard limit switch relay:
Adjust the rudder by manual control for the desired cut--off angle.
Turn the potentiometer R1 until H1 LED is switched off.
Summary of Contents for AP02-S01
