Raytheon Anschütz AP02-S01, Manual

Page: 116 / 166

PILOTSTAR D
4--12
3060.DOC012
Edition: March 13, 2009
RUD FAIL: Threshold for the alarm which monitors rudder response.
The Feedback unit must be installed to enable this function
(s. Chapter 4.8).
The number selected is the difference between rudder order
and rudder angle which will sound the alarm. A setting of ”0”
turns this function off.
CRS TYPE: Set per Annex -- 3.
NAV TYPE: Set per Annex -- 3. A setting of 2 or 3 is recommended.
Refer to corresponding GPS description.
LOG TYPE: Set per Annex -- 3.
Parameter value LOG 200 Pulse/nm
Parameter value NMEA LOG seriell
The following Telegramm sentences will be accepted:
-- $IIVTG (Speed over Ground, Actual Track)
-- $IIVHW (Speed made Ground)
Setting 3 is for future options and is not functional.
Refer to corresponding LOG Sensor description.
MAG TYPE: Set per Annex -- 3.
SER OUT: Set to ”A--REP” if a Raytheon Anschuetz analog repeater
is connected to the pilot.
Set to D--REP for Anschuetz Digital Navigation Display
(digital repeater -- multi function).
11. Store the parameter settings.
Press the
Yaw
key until ”STORE? sel (Y/N)” appears in the text line.
The display switches to ”STORE (Y) SET” by pressing the key once.
The setting is stored by pressing the
Set
key, ”Data stored”.