Raytheon Anschütz AP02-S01, Manual

Page: 105 / 166

PILOTSTAR D
Autopilot
4--1
Edition: March 13, 2009
3060.DOC012
4 Installation, Putting into Operation
4.1 SAFETY NOTES
ATTENTION
In opened devices or desks, voltages representing a
risk of electric shock are applied.
-- SAFETY INSTRUCTION --
As a matter of principle, the system is to be made
dead when installation work is performed on the
equipment as well as during disassembly/assembly of
components or during alteration of the circuitry.
4.1.1 Checks to be made before any Putting into Operation
In order to ensure correct functioning of the autopilot, faultless operation of the following
systems and devices is required:

Power supply
-- for the equipment concerned
-- 10 ... 36V DC for the autopilot

Steering gear and steering control system

Sensors and appertaining transmission equipment
-- Gyro compass
-- Magnetic compass / fluxgate compass
-- Log
-- Navigation receiver
4.2 Stock Taking and Inspection of Delivery
Remove the equipment parts from the cardboard boxes.
Check all equipment parts for visual deficiencies and transport damages.
Place all eqipment parts on a safe support.