PILOTSTAR D
Autopilot
4--13
Edition: March 13, 2009
3060.DOC012
12. If the gyro compass has a step heading output, scroll up to ”SYNCHRON”.
Using the
and
keys, synchronize the gyro indication with the gyro
compass.
If the gyro compass is a Raytheon Anschütz Gyro, verify that the gyro compass
heading matches the gyro indication.
Note
If the Pilotstar D is provided for analog output and An-
schütz rudder angle indicators and feedback unit are
not used, step
#13
,
#14
,
#15
,
#16
and
#17
can be
bypassed.
13. (see Chapter 4.8.1)
14. (see Chapter 4.8.1.1)
15. (see Chapter 4.9)
16. (see Chapter 4.9.1)
17. Using the primary steering system, check the rudder angle indicators for correct
direction and scale.
17.1 Change the mode switch to the ”
AUTO
” position and press the
Trim
Man
key.
The
Trim
Man
LED should now illuminate. The operating mode
Man
ual control is
active.
17.2 Using the heading setting knob, order 20
of rudder and ensure that the rudder
moves in the proper direction and to the proper position.
The rudder angle indicator shows the correct direction.
If the rudder moves backwards, reverse the port and starboard solenoid wiring and
check again.
Summary of Contents for AP02-S01
