PILOTSTAR D
Autopilot
4--9
Edition: March 13, 2009
3060.DOC012
4.7
Initial Power Application and Testing of Pilotstar D, dock side test and alignment
1.
The gyro compass, navigation receiver, speed log, magnetic compass and
steering system should be already tested and operating.
2.
Select the primary steering control system, such as ”
HAND
” using the steering
mode selector switch.
3.
Remove the fuse from the Junction PCB of the Connection Unit
(see Chapter 3.3.1).
4.
Switch the ship fuse for the main supply voltage to ”OFF”.
Connect the power supply cabel for the supply voltage at
-- B 15.3 (0V)
-- B 15.2 (+12V to 24V) or -- B 15.1 (+32V).
Look for the right polarity!!!
5.
Insert the fuse from the Junction PCB of the Connection Unit.
-- position F1 for 32V supply voltage
-- position F2 for 12 to 24V supply voltage.
6.
Switch the ship fuse ”ON”. Pilotstar D should now go through its self test and
then to ”
STANDBY
” mode (s. Chapter 2.2.4). If the text line indicates the message
”SYNCHRON” see step #12.
7.
Using the
Rud
key, scroll down to ”CONFIG.off”.
Use the
key to change to ”CONFIG.on”.
Use the
Rud
key to scroll to ”SERV CODE”.
Use the
key to set the value to ”
3
”.
Use the
Rud
key to scroll to ”COLD STRT”.
Press the
key.
The Pilotstar D is now set to factory default values.
Summary of Contents for AP02-S01
