Raytech WR14 Instruction Manual Download Page 93

Page: 93 / 119

Version 3.03

WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual

CONCEPT OF T-BASE PRO

The basic T-Base Pro software is free to everyone. It consists of the Raytech native driver, internal
database, possibilities to create and handle transformers and measurements and, of course, the
graphical user interface.

A Software Development Kit (SDK) to create your own custom Add-On is also provided.

Proprietary Raytech Add-Ons are available as an option.

Download your FREE copy of the T-Base Pro software at:

http://TBase.Raytech.ch

COMPONENTS OF T-BASE PRO

T-BASE PRO – TOTALLY FREE

Import

transformer name plate data and measuring results

from devices via USB device, USB key or RS 232 with a few
clicks.

Generate

transformer name plate data sets on your PC and

export them to devices.

View

measurement data in a table or diagram.

Generate, save and print

test reports.

Use powerful search functions

to find your measurements

quickly.

Work

with a clearly arranged user interface.

CREATE YOUR ADD-ON WITH T-BASE SDK

T-Base Pro is designed as an open platform. A Software
Development Kit (SDK) to create custom Add-Ons easily is
provided by Raytech.

Summary of Contents for WR14
























































































































Search results

Summary of Contents for WR14

Reviews:

Related manuals for WR14

Brands by name

Popular brands

Raytech WR14, Instruction Manual

Search results

Summary of Contents for WR14

Reviews:

Related manuals for WR14

Brands by name

Popular brands