95
WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
Version 3.03
When remote control is chosen for a device, a new
ribbon tab
is created and automatically selected.
Running processes like remote control or data exchange will not be affected. The newly created
ribbon
tab
may appear differently for several Raytech devices.
The
device control
section contains all options to set up a device and do measurements. With a few
clicks, a measurement is started and the results are displayed in the
results section
immediately.
Details about the device status and communication are shown in the
status
section. In the screen
example below, a winding resistance meter is connected. The meter status is safe and data exchange is
listed in the console.
USB DRIVER FOR T-BASE PRO
The USB Drivers must be activated to allow communication between the Raytech instrument and a
computer. This is accomplished by entering a simple Service Code:
2001#
This is
described further in “Raytech USB Driver for T-Base” on page 100.
