Raymarine a67, Installation And Operation Instructions Manual, Page: 47 / 330

600 watt sonar-compatible sonar transducer connection via
optional adaptor — Sonar variant multifunction displays
D12257-1
1
2
3
1. Rear connector panel of multifunction display (Sonar
variant).
2. E66066 adaptor cable.
3. Sonar transducer.
Transducer adaptor cable
Cable Part number
0.5 m (1.64 ft) transducer adaptor
cable E66066
Sonar transducer connection — Non-Sonar variant
multifunction displays
1
2
S eaTalk
hs
/ RayNet
SeaTalk
hs
/
RayNet
3
6
5
4
D 12258-1
1. Rear connector panel of multifunction display (Non-sonar
variant).
2. Raymarine network switch (only required if connecting more
than one device using SeaTalk
hs / RayNet).
3. RayNet cable.
4. Raymarine sonar module.
5. Sonar transducer cable.
6. Sonar transducer.
Minn Kota sonar transducer connection via optional adaptor
cable (Sonar variant multifunction displays only)
D12259-1
1
4
2 3
1. Rear connector panel of multifunction display (Sonar
variant).
2. Minn Kota transducer adaptor cable.
3. Minn Kota transducer cable.
4. Minn Kota transducer.
Sonar variant multifunction displays
The table below details which multifunction display variants
feature a built-in sonar module and can be connected directly to
compatible sonar transducers.
Sonar variants Non-sonar variants
a67 a65
e7D e7
c97 c95
c127 c125
e97 e95
e127 e125
e165
Minn Kota transducer adaptor cable
Connects a Minn Kota sonar transducer to a compatible
Raymarine multifunction display.
Cable Part number
1 m (3.28 ft) Minn Kota transducer
adaptor cable A62363
Thermal camera connection
You can connect a thermal camera to your New c Series or New
e Series multifunction displays.
Note: New a Series does not support thermal cameras.
The camera is connected via a Raymarine network switch. If
you want to use the optional Joystick Control Unit (JCU) with
the camera this must also be connected to the network switch.
A composite video connection is required between the camera
and the multifunction display.
2
3
4 5 6
D12260-1
1
8
7
S eaTalk hs / RayNet
SeaTalk
hs
/ RayNet
SeaTalk
hs
/ RayNet
1. Multifunction display
2. Raymarine network switch
3. Joystick Control Unit (JCU), optional
4. SeaTalk hs to RayNet cable
5. Ethernet cable coupler.
6. PoE (Power over Ethernet) injector (only required if using
the optional JCU).
7. Thermal camera
8. Video connection
Important notes
• You can control the thermal camera using your multifunctional
display. The Joystick Control Unit (JCU) is optional, but can be
Cables and connections
47