Raymarine a67, Installation And Operation Instructions Manual, Page: 227 / 330

System Setup
Settings to optimize operation for this particular
system / installation.
About / Help Helpful information and restore to factory defaults
setting.
Exit Cancels on-screen menu.
Video setup menu
Menu item /
Description
Settings / Operation
Set Thermal Color
Default This saves the current color setting as the
default value.
Set Reverse Video
Default
This toggles the infrared image between
white-hot (or red-hot if viewing a color image)
and black-hot.
Enable / Disable Color
Thermal Video
Enable or disable the thermal color palettes:
• Enabled – Greyscale, Red, Sepia, Rainbow
and Fusion palettes are available.
• Disabled – Only Greyscale and Red palettes
are available.
Display Test Pattern Use the display test pattern when setting up
the color / contrast settings for your particular
display or monitor. You can switch through the 4
test patterns available.
Exit
Set symbology menu
Menu item /
Description
Settings / Operation
Enable / Disable PC
Icon • Enabled – The PC icon is displayed whenever
a PC is detected on the network.
• Disabled – The PC icon is not displayed.
Enable / Disable JCU
Icon
• Enabled – The JCU icon is displayed
whenever a JCU is detected on the network.
• Disabled – The JCU icon is not displayed.
Display All Icons Selecting this menu item enables all available
icons.
Display Minimal Icons Selecting this menu item reduces the icon
activity:
• Position, Zoom, Rearview, Pause,
Stabilization disabled and Point Mode
enabled icons are unaffected.
• Home and Scene icons are displayed only
momentarily.
• Other icons are not shown.
Hide All Icons Selecting this option hides all icons except for:
• Position indicator
• Rearview mode enabled
• Stabilization disabled
• Point mode enabled
Exit Returns to the main menu.
Surveillance mode menu
Menu item /
Description
Settings / Operation
Scan Width This setting determines the distance that the
camera pans left and right when in surveillance
mode. Select from:
• Narrow — The camera will scan
approximately 20º left and right of the
center (40º total).
• Medium — The camera will scan
approximately 40º left and right of the center
(80º total). Or,
• Wide The camera will scan approximately
80º left and right of the center (160º total).
Scan Speed This option determines the speed at which the
camera pans left and right when in surveillance
mode. Select between:
• Slow
• Medium
• Fast
Exit
System Setup menu
Menu item /
Description
Settings / Operation
Enable / Disable
Ball-Down Installation This menu option should be enabled when
the camera is mounted upside down in the
“ball-down” configuration.
Enable / Disable
Twist-to-Pan mode This menu option changes the JCU controls pan
and zoom functions as follows:
Enabled — Pan the camera by rotating the
Puck clockwise or counterclockwise, zoom in
and out by pushing the puck in and pulling it out.
(This is default operation of the JCU).
Disabled — Pan the camera by moving the
Puck left or right, zoom in and out by rotating
the Puck clockwise and counterclockwise.
Enable / Disable High
Power Standby
This option controls the amount of power
used to hold the camera in position while it
is in Standby mode. The enabled setting will
consume more power, but will help ensure that
the camera is held in place in rough seas.
Note: If the camera moves when in
standby (due to shock or vibration), then the
Position indicator or Home setting may need
realigning (reset the camera to realign).
Enable / Disable High
Motor Torque This option controls the amount of power used
to hold the camera steady when in use. The
enabled setting will consume more power, but
help ensure that the camera is held in place in
rough seas.
The High Motor Torque mode may be useful for
power boats that operate at higher speeds and
experience high impact environments, and can
accept higher power consumption.
Note: If the camera moves due to shock
or vibration, then the Position indicator or
Home setting may need realigning (reset the
camera to realign).
Enable / Disable
Rearview Mode When this option is enabled the camera image
is reversed and you will see a mirror image on
the display.
Enable / Disable
Stabilization When this option is enabled horizontal and
vertical stabilization is turned on. Only applies
to T470SC and T473SC.
Thermal camera application — Pan and tilt cameras
227