Chapter 5
Installation
40
RAYLASE 3-Axis Subsystems for Laser Beam Deflection
MN025 / v2.1.0
Optimizing settings
o
Repeat the entire adjustment process until optimum laser beam input point and input angle
settings are achieved.
5.4.3
Assembly
The process for assembling all of the components is as follows:
o
Install the deflection unit (4).
o
Install the focusing lens(es) (2). Pay attention to the corresponding markings.
o
Install the linear translator, (5) or (6) depending on the model.
o
If you are using a subsystem with manual field size adjustment, you now have to adjust the
field size (
page 44, Manually adjusting the field size). In subsystems with motorized field
size adjustment, this is done by the software.
o
Fit the cover (1).
Fig. 18
Finalize the
checking proce-
dure
AXIALSCAN
(standard)
AXIALSCAN
(motorized)
FOCUSSHIFTER
(standard)
