Chapter 5
Installation
38
RAYLASE 3-Axis Subsystems for Laser Beam Deflection
MN025 / v2.1.0
5.4
Checking the beam coupling: AXIALSCAN (Standard),
AXIALSCAN (motorized), FOCUSSHIFTER (Standard)
5.4.1
Preparation
In order to be able to check the beam coupling, all components located in the beam path must
be removed and the deflection unit dismantled. The process for doing this is as follows:
o
Remove the following components in turn:
-
Connecting cable between linear translator module and deflection unit
-
Linear translator module cover (1).
o
Mark the installation position of the focusing lens (2) or the two focusing lenses for re-
installation.
o
Remove the following components in turn:
-
Focusing lens and second focusing lens if fitted.
-
Deflection unit (4); in subsystems with spacer: Only dismantle the deflection unit, not
the spacer (3) and the mounting plate for the deflection unit.
-
Linear translator, (5) or (6) depending on model.
o
Protect the focusing lens, deflection unit and linear translator against dust.
Fig. 16
Preparing the
beam coupling
AXIALSCAN
(standard)
AXIALSCAN
(motorized)
FOCUSSHIFTER
(standard)
