RaycoWylie i4000, Instruction Manual

Page: 41 / 72

41 i4000 Lattice Crane Instruction Manual
55M4000EBE00 Rev C
A maximum of 2 hoists are available. When a 2nd load
interface is activated during calibration, the Auxiliary
hoist will appear automatically in the list of hoists to edit.
3. Now you can select the hoist you will use for the lifting
operation. Press ‘ENTER’ to edit the hoist.
5. Press ‘ENTER’ again to confirm your selection.
4. Use the ‘UP/DOWN’ keys to
choose the desired hoist.
4.5 System in lifting mode (cont.)
4.5.2 Selecting the lifting hoist (cont.)v
Once the hoist to be used has been selected (either the main hoist or the auxiliary
hoist), you can change its parameters. These are: the maximum load allowed
(maximum capacity authorized by the crane manufacturer) and the number of
parts of line.
4.5.3.1 Maximum load allowed
The lifted load is always compared to this value in order to warn the operator when
he approaches or reaches an overload and to apply a motion cut if necessary. Use
the crane’s manufacturer capacity chart to find the maximum load that can be
lifted for your current configuration.
4.5.3 Adjusting the hoist’s parameters
1. In the main mode (operating mode), select the Load tab using
the 'LEFT/RIGHT' keys.
2. Press ‘ENTER’ to view the 'lifting hoist parameters' menu.
3. Scroll to the Max load line using the 'UP/DOWN' keys.