RaycoWylie i4000, Instruction Manual

Page: 40 / 72

55M4000EBE00 Rev C
40
i4000 Lattice Crane
Instruction Manual
4.5.2 Selecting the lifting hoist
4. Use the ‘UP/DOWN’ keys to choose the configuration which
corresponds to the current crane configuration.
5. Press ‘ENTER’ to accept the new configuration. Or press the
‘ESCAPE’ key to quit without saving the changes.
1. In the main mode (operating mode), select the Load tab using
the 'LEFT/RIGHT' keys.
2. Press ‘ENTER’ to view the 'lifting hoist parameters' menu.
1. To change the configuration, go to the item 'Configuration' and
press 'ENTER'.
2. Scroll vertically to the 'Select
crane configuration' menu with
the ‘UP/DOWN’ keys.
3. Press ‘ENTER’ to access the
menu.
4.5 System in lifting mode (cont.)
4.5.1 Selecting crane configuration (cont.)