RaycoWylie i4000, Instruction Manual

Page: 68 / 72

55M4000EBE00 Rev C
68
i4000 Lattice Crane
Instruction Manual
Preventive maintenance
•
Your i4000 system has been designed to work during long periods, requiring the least
maintenance possible. However, the system does need to be maintained and cleaned to
function properly.
•
Use a soft soap (or a glass cleaner) and a soft cloth to wash the surface of the display unit.
•
Replace all cables that might be damaged. Check that the contacts of the connectors are
not corroded.
•
Replace the rope drum brushes if they show signs of wear.
•
Replace the A2B switches if the piston is too corroded.
6.4 Maintenance
Unless otherwise specified by a RaycoWylie technician,
all (original and replacement) parts must be provided
by RaycoWylie.
In order to ensure that the i4000 display is water resistant, make sure the back has an
X-shaped tightening .
Your i4000 system does not need any additional lubrication.
Important: If you see condensation forming inside the
display unit’s screen, open the cover and let it dry for a
whole day in a dry place.
Important: Do not clean the i4000 display unit, the junction
boxes, the angle sensors, load cells, and connectors with a
high-pressure air stream. This could cause mold to appear in
the connectors, and a possible failure of the sensors.