RaycoWylie i4000, Instruction Manual

Page: 42 / 72

55M4000EBE00 Rev C
42
i4000 Lattice Crane
Instruction Manual
5. Change the first digit
by entering your
desired value, using
the 'UP/DOWN' keys.
Repeat steps 5 and 6 for the following digits. After entering the last
digit, press 'ENTER' to save the value.
4. Press ‘ENTER’ to edit
the value.
6. Press ‘ENTER’ again
to move to the second
digit.
Press the 'LEFT' key to go back to the previous
digit. Press the 'RIGHT' key to go to the next digit.
At any time, press the 'ESCAPE' key to go back
without saving changes.
4.5.3.2 Number of parts of line
The number of parts of line is used for load calculation and
it helps to assess the allowed lifting limit of the rope. A
indicator will lights up if the maximum load is limited by
the rope’s capacity.
1. In the main mode (operating mode), select the Load tab using
the 'LEFT/RIGHT' keys.
To change the number of parts of line, follow these steps:
4.5 System in lifting mode (cont.)
4.5.3.1 Maximum load allowed (cont.)