RaycoWylie i4000, Instruction Manual

Page: 50 / 72

55M4000EBE00 Rev C
50
i4000 Lattice Crane
Instruction Manual
Show the zones which are programmed:
The dial on the left shows a view from above:
-the radius limit as well as the left and right
walls will be shown in red.
The dial on the right shows a view from the side:
- the height limit will be shown in red.
The system includes the Range limiting device option. When a rotation sensor is installed on
the crane, and the Range limiting device of the i4000 system is activated, a new tab will appear
on the selection bar.
HEIGHT
LIMIT
RIGHT WALL
LIMIT
RADIUS
LIMIT
LEFT WALL
LIMIT
RANGE
LIMITING TAB
4.7.2 Accessing the range limiting adjustment menu
The yellow bar shows the moving boom position.
A yellow arrow indicates an approaching limit.
A red arrow indicates a reached limit.
Once the Range limiting tab is highlighted, press ‘ENTER’ to view a list of
limits available for programming:
4.7.1 Range limiting option