RaycoWylie i4000, Instruction Manual

Page: 51 / 72

51 i4000 Lattice Crane Instruction Manual
55M4000EBE00 Rev C
RESTRICTEDAREA
Boom tip height
1. When in the range limiting
tab, press the ‘ENTER’ key
to access the range limiting
adjustment menu.
2. The «Set limit high» line
is highlighted by default.
If it is not the case scroll up or
down to highlight this line.
3. Press the Select button to confirm
your choice.
4. Boom up to the desired boom tip height limit.
5. Press the Select button to confirm the
maximum boom tip height position.
6. As you release the Select button, a 10 seconds countdown will
allow you to boom down before your programmed height limit
becomes active.
Height limit
programmed
(RED ZONE)
4.7.3 Height Limit
The height limit is the maximum boom tip height desired. We can also consider
that is a ceiling of fixed height on 360 °.
Height limit
approached
Height limit
reached
Boom tip height